Lithium batteries are widely used in a variety of electronic devices due to their high energy density, long life and environmentally friendly characteristics. However, if not properly used and maintained, the lifespan of lithium batteries may be significantly shortened. Here are some key recommendations on how to extend the life of lithium batteries.
1.Shallow cycle charging
Shallow cycle charging means avoiding completely discharging the battery to zero and then charging it to full capacity. Instead, you should try to charge the battery before it is fully depleted, which reduces the stress on the battery and thus extends its life. For example, start charging when the charge level is down to about 20% to 30%, rather than waiting until it is fully depleted.
2.Depth of discharge control
Depth of discharge refers to the percentage of charge from the fully charged state to the termination of discharge. In order to prolong the life of lithium batteries, it is recommended to control the depth of discharge between 50% and 80%. This means that instead of completely discharging the battery to zero, try to charge it when the charge drops to about 20% to 30%. This reduces the load on the battery and extends its life.
3.Cyclic deep discharge
While shallow cyclic charging and discharging is recommended for regular use, it is also beneficial to perform a deep discharge once in a while. This helps to calibrate the battery's charge indicator and ensure its accuracy. However, please be careful not to perform deep discharges too frequently as this may cause damage to the battery.
4.Use a matched charger
It is important to use a charger that matches your battery and device. A mismatched charger may result in slow charging, overheating or battery damage. Therefore, make sure to use an official charger or a certified third-party charger that is compatible with your device.
5.Avoid high and low temperatures
Lithium batteries are very sensitive to temperature. Too high temperature will accelerate the aging process of the battery, while too low temperature may cause the battery power to drop rapidly or fail to charge. Therefore, please try to store the battery in a cool, dry environment and avoid exposure to sunlight or extreme temperature conditions.
6.Initial Charge Activation
For newly purchased lithium batteries, initial charge activation is recommended. This usually involves fully charging the battery, then discharging it to approximately 20% to 30% and then fully charging it again. This process helps to calibrate the battery's charge indicator and bring it up to optimal performance.
In conclusion, by following the above recommendations, you can effectively extend the life of your lithium batteries and ensure that your electronic devices continue to operate reliably.
GET A QUOTE